GeniSim


Publications in PDF








DESIGNING CELLS FOR THE FUTURE -WIDER AND/OR EVEN HIGHER AMPERAGE? (as published)
480 KB

DESIGNING CELLS FOR THE FUTURE -WIDER AND/OR EVEN HIGHER AMPERAGE? (as submitted)
4.46 MEG

LOW ENERGY CONSUMPTION CELL DESIGNS INVOLVING COPPER INSERTS AND AN INNOVATIVE BUSBAR NETWORK LAYOUT (as published)
2.47 MEG

LOW ENERGY CONSUMPTION CELL DESIGNS INVOLVING COPPER INSERTS AND AN INNOVATIVE BUSBAR NETWORK LAYOUT (as submitted)
1.30 MEG

NEW BUSBAR NETWORK CONCEPTS TAKING ADVANTAGE OF COPPER COLLECTOR BARS TO REDUCE BUSBAR WEIGHT AND INCREASE CELL POWER EFFICIENCY
2.92 MEG

MODELLING GRAVITY WAVES IN AN ALUMINIUM REDUCTION CELL USING OPENFOAM (as published)
2.97 MEG

MODELLING GRAVITY WAVES IN AN ALUMINIUM REDUCTION CELL USING OPENFOAM (as submitted)
1.58 MEG

MODELING GRAVITY WAVE IN 3D WITH OPENFOAM IN AN ALUMINUM REDUCTION CELL WITH REGULAR AND IRREGULAR CATHODE SURFACES
2.46 MEG

ON THE IMPORTANCE OF FIELD VALIDATION IN THE USE OF CELL THERMAL BALANCE MODELING TOOLS
1.63 MEG

A NEW ALUMINIUM ELECTROLYSIS CELL BUSBAR NETWORK CONCEPT
2.81 MEG

NON-LINEAR STABILITY ANALYSIS OF CELLS HAVING DIFFERENT TYPES OF CATHODE SURFACE GEOMETRY
2.56 MEG

IN-DEPTH ANALYSIS OF LINING DESIGNS FOR SEVERAL 420 KA ELECTROLYTIC CELLS
2.89 MEG

CELL STABILITY STUDIES USING THE MOST RECENT MHD-VALDIS CODE VERSION (as published)
548 KB

CELL STABILITY STUDIES USING THE MOST RECENT MHD-VALDIS CODE VERSION (as submitted)
1.17 MEG

INFLUENCE OF THE CATHODE SURFACE GEOMETRY ON THE METAL PAD CURRENT DENSITY
1.85 MEG

FURTHER IMPROVEMENT OF ALUMINIUM REDUCTION CELL RESISTANCE SLOPE CALCULATION
286 KB

THE STARPROBETM: A NEW TECHNOLOGY ALLOWING SIMULTANEOUS MEASUREMENTS OF FOUR CRYOLITIC BATH PROPERTIES IN ONLY FOUR MINUTES
354 KB

WHAT IS THE STARPROBETM AND HOW IT CAN HELP YOU IMPROVE YOUR BATH RATIO AND TEMPERATURE CONTROL (as published)
304 KB

WHAT IS THE STARPROBETM AND HOW IT CAN HELP YOU IMPROVE YOUR BATH RATIO AND TEMPERATURE CONTROL (as submitted)
2.42 MEG

TESTING A NEW STARPROBETM MEASUREMENT BASED RATIO CONTROL ALGORITHM USING A DYNAMIC CELL SIMULATOR (as published)
941 KB

TESTING A NEW STARPROBETM MEASUREMENT BASED RATIO CONTROL ALGORITHM USING A DYNAMIC CELL SIMULATOR (as submitted)
301 KB

PRODUCTION APPLICATION STUDY ON MAGNETO-HYDRO-DYNAMIC STABILITY OF A LARGE PREBAKED ANODE ALUMINUM REDUCTION CELL
1.74 MEG

IN DEPTH ANALYSIS OF ENERGY-SAVING AND CURRENT EFFICIENCY IMPROVEMENT OF ALUMINUM REDUCTION CELLS
953 KB

TESTING THE STARPROBETM AT DUBAL
2.0 MEG

MEASURING BATH PROPERTIES USING THE STARPROBETM
70 KB

ENERGY SAVING FROM A REDUCTION POT (as published)
675 KB

DEPTH ANALYSIS AND POTENTIALITY EXPLOITATION ON ENERGY-SAVING AND CONSUMPTION-REDUCTION OF ALUMINUM REDUCTION POT
1.59 MEG

MODELING CATHODE COOLING DUE TO POWER INTERRUPTION
499 KB

MODELLING CATHODE COOLING AFTER POWER SHUTDOWN (as published)
2.55 MEG

MODELLING CATHODE COOLING AFTER POWER SHUTDOWN (as submitted)
1.10 MEG

TESTING CELL CONTROLLER ALGORITHMS USING A DYNAMIC CELL SIMULATOR (as published)
9.17 MEG

TESTING CELL CONTROLLER ALGORITHMS USING A DYNAMIC CELL SIMULATOR (as submitted)
516 KB

TESTING IN SITU ALUMINIUM CELL CONTROL WITH DYNA/MARC CELL SIMULATOR
660 KB

USING ANSYS AND CFX TO MODEL ALUMINIUM REDUCTION CELL SINCE 1984 AND BEYOND
2.67 MEG

DEVELOPMENT AND APPLICATION OF AN ANSYS BASED THERMO-ELECTRO-MECHANICAL COLLECTOR BAR SLOT DESIGN TOOL
361 KB

RETROFIT OF A 500 KA CELL DESIGN INTO A 600 KA CELL DESIGN (as published)
2.49 MEG

RETROFIT OF A 500 KA CELL DESIGN INTO A 600 KA CELL DESIGN (as submitted)
2.48 MEG

DEVELOPMENT AND APPLICATION OF AN ANSYS® BASED THERMO-ELECTRO-MECHANICAL ANODE STUB HOLE DESIGN TOOL
538 KB

MATHEMATICAL MODELLING OF ALUMINUM REDUCTION CELL POTSHELL DEFORMATION
536 KB

MATHEMATICAL MODELING OF ALUMINIUM REDUCTION CELL POTSHELLS: IMPROVEMENTS AND APPLICATIONS (as published)
1.28 MEG

MATHEMATICAL MODELING OF ALUMINIUM REDUCTION CELL POTSHELLS: IMPROVEMENTS AND APPLICATIONS (as submitted)
635 KB

CHALLENGES IN STUB HOLE OPTIMISATION OF CAST IRON RODDED ANODES
1.57 MEG

IMPACT OF THE VERTICAL POTSHELL DEFORMATION ON THE MHD CELL STABILITY BEHAVIOR OF A 500 KA ALUMINUM ELECTROLYSIS CELL
295 KB

MODELLING THERMAL DYNAMIC RESPONSE TO A 3-HOUR TOTAL POWER SHUTDOWN EVENT
371 KB

CELL VOLTAGE NOISE REMOVAL AND CELL VOLTAGE (OR RESISTANCE) SLOPE CALCULATION
128 KB

THERMO-ELECTRO-MECHANICAL MODELING OF A HALL-HÉROULT CELL COKE-BED PREHEATING
2.41 MEG

COMPARING THE MHD CELL STABILITY OF AN ALUMINIUM REDUCTION CELL AT DIFFERENT METAL PAD HEIGHT AND LEDGE THICKNESS
2.34 MEG

BUSBAR SIZING MODELING TOOLS: COMPARING AN ANSYS® BASED 3D MODEL WITH THE VERSATILE 1D MODEL PART OF MHD-VALDIS
595 KB

THERMO-CHEMO-MECHANICAL MODELING OF A HALL-HÉROULT CELL THERMAL BAKE-OUT
1.18 MEG

MHD AND POTSHELL MECHANICAL DESIGN OF A 740 KA CELL
2.54 MEG

EXCESS ALF3 CONCENTRATION IN BATH CONTROL LOGIC
690 KB

IMPACT OF USING SELECTIVE COLLECTOR BAR RODDING ON THE MHD STABILITY OF A 500 KA ALUMINIUM ELECTROLYSIS CELL
554 KB

STUDY OF THE THERMALLY-INDUCED SHELL DEFORMATION OF HIGH AMPERAGE HALL-HÉROULT CELLS
5.13 MEG

WEAKLY COUPLED THERMO-ELECTRIC AND MHD MATHEMATICAL MODELS OF AN ALUMINIUM ELECTROLYSIS CELL
1.38 MEG

THERMO-ELECTRIC DESIGN OF A 740 kA CELL, IS THERE A SIZE LIMIT?
1.12 MEG

ACCURATE ASSESSMENT OF THE HIRAKUD SMELTER ALUMINIUM REDUCTION CELL THERMAL BALANCE USING ONLY TEMPERATURE MEASUREMENTS
206 KB

DEMONSTRATION THERMO-ELECTRIC AND MHD MODEL OF A 500 KA AL ELECTROLYSIS CELL: PART 2
1.75 MEG

CALCULATING TEMPERATURE UNDER HOOD OF A PREBAKE ANODE CELL
24 KB

DEMONSTRATION THERMO-ELECTRIC AND MHD MODEL OF A 500 KA AL ELECTROLYSIS CELL
1.17 MEG

THERMO-ELECTRIC DESIGN OF A 500 KA CELL
96 KB

INDIAN ALUMINIUM SMELTERS ROADMAP SELECTS MATHEMATICAL MODELING AS KEY STRATEGIC ACTIVITY
1.82 MEG

PERFORMING FAST TREND ANALYSIS ON CELL KEY DESIGN PARAMETERS
255 KB

TOWARDS THE DEVELOPMENT OF A 3D FULL CELL AND EXTERNAL BUSBARS THERMO-ELECTRIC MODEL
721 KB

USING MATHEMATICAL MODELS TO IMPROVE THE THERMAL BALANCE OF HALL-HÉROULT CELLS
477 KB

USING ANSYS TO MODEL ALUMINUM REDUCTION CELL SINCE 1984 AND BEYOND
660 KB

MODELING POWER MODULATION
227 KB

GENISIM'S 2001 BROCHURE
1.24 MEG

COMPUTATION OF ACCURATE HORIZONTAL CURRENT DENSITY IN METAL PAD USING A FULL QUARTER CELL THERMO-ELECTRIC MODEL
480 KB

3D MODELING OF THE VENTILATION PATTERN IN AN ALUMINIUM SMELTER "POTROOM" BUILDING USING CFX-4
3.35 MEG

USAGE OF A FULL 3D TRANSIENT THERMO-ELECTRIC F.E. MODEL TO STUDY THE THERMAL GRADIENT GENERATED IN THE LINING DURING A COKE PREHEAT
177 KB

DEVELOPMENT OF A 3D TRANSIENT THERMO-ELECTRIC CATHODE PANEL EROSION MODEL OF AN ALUMINUM REDUCTION CELL
137 KB

THERMO-ELECTRIC DESIGN OF A 400 kA CELL USING MATHEMATICAL MODELS: A TUTORIAL
1.77 MEG

DEVELOPMENT OF A 2D+ DYNAMIC MODEL OF AN ALUMINUM REDUCTION CELL
97 KB

USING ANSYS® BASED ALUMINUM REDUCTION CELL ENERGY BALANCE MODELS TO ASSIST EFFORTS TO INCREASE LAURALCO´S SMELTER PRODUCTIVITY
653 KB

ANALYSIS SOLUTIONS SPRING 1998: ALUMINUM ELECTROLYSIS PROCESS SIMULATION
2.44 MEG

COMPUTATION OF ALUMINUM REDUCTION CELL ENERGY BALANCE USING ANSYS® FINITE ELEMENT MODELS
373 KB

A PROPOS DE GENISIM
110 KB

INDUSTRIAL ALUMINUM ELECTROLYSIS TMS COURSE CHARLESTON 1997: PROCESS SIMULATION
747 KB

SYMPOSIUM ÉLECTROLYSE 1997 CQRDA: OPTIMISATION DU PROCÉDÉ PAR MODÉLISATION
563 KB

ESTIMATION OF THE GAS EXHAUST RATE REQUIRED ON AN ALUMINIUM REDUCTION CELL DURING START-UP
1.56 MEG

SIMULATION OF THE DYNAMIC RESPONSE OF ALUMINUM REDUCTION CELLS
480 KB

GENISIM'S 1996 BROCHURE
507 KB

USING A STEADY STATE MODEL OF AN ALUMINUM REDUCTION CELL TO INVESTIGATE THE IMPACT OF DESIGN CHANGES
67 KB

PROCESS SIMULATION OF ALUMINUM REDUCTION CELLS
109 KB

MODELING OF ALUMINUM REDUCTION CELLS USING FINITE ELEMENT ANALYSIS TECHNIQUES
1.82 MEG

EVALUATION OF THERMAL STRESSES DUE TO COKE PREHEAT OF A HALL-HÉROULT CELL
1.39 MEG

THERMO-ELECTRO-MAGNETIC MODELING OF A HALL-HÉROULT CELL
786 KB

THERMO-ELECTRIC ANALYSIS OF THE GRANDE-BAIE ALUMINUM REDUCTION CELL
2.00 MEG

ANSYS NEWS: ANSYS IN THE ALUMINUM INDUSTRY
457 KB

THERMAL STUDY OF THE COKE PREHEATING FOR HALL-HÉROULT CELL
1.10 MEG

SHELL DESIGN TECHNIQUE CONSIDERING THE SODIUM SWELLING PHENOMENA OF CARBON CATHODE BLOCKS
332 KB

TURBULENCE MODELING OF AIR CIRCULATION IN AN ENCLOSURE WITH MULTIPLE OPENINGS AND LOCAL HEAT SOURCES
1.14 MEG

THERMO-ELECTRIC ANALYSIS OF ALUMINUM REDUCTION CELLS
200 KB

THERMO-ELECTRIC COUPLED FIELD ANALYSIS OF ALUMINUM REDUCTION CELLS USING THE ANSYS PARAMETRIC DESIGN LANGUAGE
505 KB

CATHODE SHELL STRESS MODELLING
1.54 MEG

LA MODÉLISATION DE LA TURBULENCE DANS UNE ENCEINTE AVEC OUVERTURES ET SOURCES CHAUDES LOCALISÉES
1.01 MEG

SIMULATION BIDIMENSIONNELLE DE PHENOMENES DE CONVECTION NATURELLE ET FORCEE EN FORMULATION PRIMITIVE
834 KB

SIMULATION MATHÉMATIQUE DE LA CIRCULATION DE L'AIR DANS UNE ENCEINTE AVEC OUVERTURES ET SOURCES CHAUDES LOCALISÉES
6.61 MEG






GéniSim Inc. 3111 rue Alger Jonquière Québec G7S 2M9
Tél: (418) 548-1541 Fax: (418) 548-4215
E-mail: